China Hot selling Plastic Tap 3/4″ and 2″ PE Barrel Dispener Faucet Industrial Drum Valve with Good quality

Product Description

Plastic Tap 3/4″ and 2″ PE Barrel Dispener Faucet Industrial Drum Valve 
    

2″ BSP Polyethylene Drum Tap / PE Barrel Faucet
Art No. 2″ BSP Polyethylene Drum Faucet
Material PE ( Polyethylene )
Spout Dia 2″
Bung Thread 2″
Applications Most Acids,Caustics and Oils
Packing 50PCS/CTN
G/N Weight 15/14KGS
Carton Size 56 x 43 x 33cm
 
3/4″ BSP Polyethylene Drum Tap / PE Barrel Faucet
Art No. 3/4″ BSP Polyethylene Drum Faucet
Material PE ( Polyethylene )
Spout Dia 0.6″
Bung Thread 3/4″
Applications Most Acids,Caustics and Oils
Packing 250PCS/CTN
G/N Weight 9.3/8.8KGS
Remarks Nature color is available
 
2″ BSP Polyethylene Drum Faucet / PE Pail Tap
Material PE ( Polyethylene )
Spout Dia 41mm
Bung Thread 2″
Applications For use with nonflammable, corrosive liquids. 
Packing 50PCS/CTN
G/N Weight 15/14KGS
Carton Size 56 x 43 x 33cm
 
3/4″ BSP Polyethylene Barrel Tap / PE Pail Faucet
Art No. 3/4″ BSP Polyethylene Drum Faucet
Material PE ( Polyethylene )
Spout Dia 8.5mm
Bung Thread 3/4″
Applications For use with nonflammable, corrosive liquids. 
Packing 250PCS/CTN
G/N Weight 9.3/8.8KGS
Carton Size 36 x 35 x 31cm
 
Jerry Can Aeroflow Dispensing Tap in Cap
Material PP,HDPE,LDPE
Sizes Available 1). DIN51
2). DIN61 
3). DIN71
4). 58mm ( 54x4mm )
Applicable Can Neck 51mm,61mm,71mm, 58mm
Outlet Diameter 1). 19mm Bevelled 
2). 22mm Flat
Applications 5L – 60L containers 
Packing 100PCS/CTN
 
Jerry Can Tap-Cap With Air Return Valve
Material PP,HDPE,LDPE
Sizes Available 1). DIN51
2). DIN61 
3). DIN71
4). 58mm ( 54x4mm )
Applicable Can Neck 51mm,61mm,71mm, 58mm
Outlet Diameter 1). 19mm Bevelled 
2). 22mm Flat
Applications 5L – 60L containers 
Packing 100PCS/CTN
 
  Bottling Bucket Plastic Spigot For Homebrew Beer Wine Making
Material Food grade plastic
Fits 1″ spigot hole
Length 8.4cm
Height 10cm
Diameter 2.5cm
Hose Tail Fits 5/16″ or 3/8″ siphon tubing
Net Weight 32G
Packing 300PCS/CTN
 
  Bottling Bucket Plastic Spigot For Homebrew Beer Wine Making
Material Food grade plastic
Fits 1″ spigot hole
Length 9.5cm
Height 7.2cm
Diameter 2.5cm
Hose Tail Fits ID 7-9mm siphon tubing
Net Weight 22G
Packing 300PCS/CTN
 
DN50 S60x6 x 3/4″ Plastic Tap for IBC Tank
PP Adapter  S60x6 Female x 3/4″ BSP Female
Material PP 
Gasket Material Polyethylene ( PE )
Drain Tap 3/4″
Packing 150PCS
Gross Weight 10KGS
Carton Size 53 x 45 x 26cm
 
DN50 S60x6 IBC Adapter x Plastic Water Tank Tap 
PP Adapter  S60x6 Female 
Material PP 
Gasket Material Polyethylene ( PE )
Sizes Available 1). S60x6 IBC Adapter x 1/2″ Drain Tap 
2). S60x6 IBC Adapter x 3/4″ Drain Tap 
Packing 150PCS
Gross Weight 15KGS
Carton Size 45 x 31 x 37cm
 
DN50 S60x6 IBC Adapter x 1/2″ Plastic Tap for IBC Tank
PP Adapter  S60x6 Female x 1/2″ BSP Female
Material PP 
Gasket Material Polyethylene ( PE )
Drain Tap 1/2″ 45 Degrees or 90 Degrees 
Packing 80PCS
Gross Weight 17KGS
Carton Size 45 x 31 x 37cm
 
DN50 S60x6 IBC Adapter x 3/4″ Plastic Tap for IBC Tank
PP Adapter  S60x6 Female x 3/4″ BSP Female
Material PP 
Gasket Material Polyethylene ( PE )
Drain Tap 3/4″ 45 Degrees or 90 Degrees 
Packing 80PCS
Gross Weight 17KGS
Carton Size 45 x 31 x 37cm
 
DN50 S60x6 IBC Adapter x 1″ Plastic Tap for IBC Tank
PP Adapter  S60x6 Female x 1″ BSP Female
Material PP 
Gasket Material Polyethylene ( PE )
Drain Tap 1″ 45 Degrees or 90 Degrees 
Packing 80PCS
Gross Weight 12KGS
Carton Size 45 x 31 x 37cm
 
S60x6 Adapter x Brass Tap for IBC Tank
Material PP + Brass
Gasket Material Polyethylene ( PE )
Adapter Sizes 1). S60x6 Female to 1/2″ BSP Female
2). S60x6 Female to 3/4″ BSP Female
Brass Taps 1). 1/2″ 
2). 3/4″
Packing 100PCS
Gross Weight 24KGS
Carton Size 45 x 31 x 37cm
 
  S60x6 x 1/2″ Lockable Brass Tap for IBC Tank
Brass Tap 1/2″ Lockable 
Adapter S60x6 Female to 1/2″ BSP Female
Adapter Material PP 
Gasket Material Polyethylene ( PE )
Packing 100PCS
Gross Weight 24.5KGS
Carton Size 45 x 31 x 37cm
 
  S60x6 x 1/2″ Double Brass Tap for IBC Tank
Brass Tap 1/2″Double Outlet 
Adapter S60x6 Female to 1/2″ BSP Female
Adapter Material PP 
Gasket Material Polyethylene ( PE )
Packing 80PCS
Gross Weight 25.5KGS
Carton Size 45 x 31 x 37cm
 
  2” IBC Cap and Extension Drain Spout Fitting
Extra large spout fits to an IBC container with a removable end 
cap,converts the buttress IBC thread (S60x6) DIN 61 to a more
useful large high flow spout
Length  
Outlet Dia 40mm
Packing 50PCS/CTN
G/N Weight  6/5KGS
Carton Size 52 x 36 x 32cm
 
  2” IBC Tap Extension Spout Angled Outlet Nozzle 
Size DN50 2″
Material PP
Gasket Material PE
PP Adapter S60x6 Female Thread
Plastic Outlet 1). 45 Degrees Outlet
2). 90 Degrees Outlet
Length 12.5CM
Packing 80PCS/CTN
Gross Weight  6KGS
Carton Size 45 x 31 x 37cm
 
  S100x8 IBC Tap Extension Drain Spout Angled Outlet Nozzle 
Size DN80 3″
Material PP
Gasket Material PE
Length 16cm
Packing 35PCS/CTN
Gross Weight  6KGS
Carton Size 45 x 31 x 37cm
 
  3M Gravity Feed Delivery Hose/Nozzle Kit with IBC Adapter
Manual Nozzle Polypropylene (PP)
SS Wire Hose Length 3M
SS Wire Hose ID 19mm
Adapter IBC DIN 61
No electric pump required
Exporting Packing 1PC/BOX,10PCS/CTN
G/N Weight  15/13.2KGS
Carton Size 70 x 35 x 60cm
 
  Liquid Height Gauge For 220L Drum and Container
Construction: PP (polypropylene)
UV resistant
String: Kevlar
2 inch and 3/4 inch male thread design
Allows for simple stock-keeping
Ease of installation and can be reused
Reads in Litre
Exporting Packing 25PCS/CTN
 
  275 Gallon 44″ Golden Gallon Tank Liquid Level Gauge 
Construction: PP (polypropylene)
UV resistant
String: Kevlar
2 inches and 1 1/2 inch NPT male thread design
Reads in gallon
Easy-to-read window has an anti-fogging vapor barrier
It is not intended for use in gasoline tanks
Exporting Packing 25PCS/CTN
 
  Nylon Non Sparking Plastic Drum Wrench
Rust proof and no spark be caused
For 5 and 55 gallon drums
Heavy-duty plastic – non-sparking
Weight: 100g
For various gallon drums
Packing 100PCS/CTN
N.W/G.W 11.25/12KGS
Carton Size 37 x 37 x 37.5cm
 
  Nylon All-in-1 Drum Bung Spanner Pail Lid Wrench Opener
Designed to fit into the bungs of all of the plastic twin bung /
tighthead drums which are manufactured around the world.
Spanner allows users to tighten or loosen the bungs in the top  
of plastic drums much easier
It also has the capability of tightening or loosening 25 or 20 litre 
caps which fit CZPT the small screw top jerrycan containers.
Packing 50PCS/CTN
N.W/G.W 7.8/8.8KGS
 
  IBC Adaptor S60x6 2″ Female to 1/2″ 3/4″ 1″ BSP Female
Material PP 
Seal Polyethylene ( PE )
Inlet Thread S60x6 2″ Female 
Sizes Available 1). S60x6 Female to BSP 1/2″ Female 
2). S60x6 Female to BSP 3/4″ Female
3). S60x6 Female to BSP 1″ Female 
4). S100x8 Female to BSP 2″ Female
 
  DIN 61 IBC Adapter With Hose Barb
Material PP
Seal Polyethylene ( PE )
Inlet Thread S60x6 2″ Female Thread
Sizes Available 1). S60x6 to 1/2″ Hose Barb
2). S60x6 to 3/4″ Hose Barb
3). S60x6 to 1″ Hose Barb
4). S60x6 to 1 1/4″ Hose Barb
5). S60x6 to 1 1/2″ Hose Barb
6). S60x6 to 2″ Hose Barb
Packing 100PCS/CTN
 
  2″ BSP Female IBC Adaptor to Female Threads
Material Polypropylene ( PP )
Seal Polyethylene ( PE )
Inlet Thread 2″ BSP Female Thread
Size Available 1). 2″ BSP Female to DIN51 Female 
2). 2″ BSP Female to 59MM Female 
3). 2″ BSP Female to DIN61 Female 
4). 2″ BSP Female to 63MM Female 
5). 2″ BSP Female to DIN71 Female 
Packing 200PCS/CTN
 
  S60x6 Female to BSP/NPT Male IBC Adaptor 
Material Polypropylene ( PP )
Seal Polyethylene ( PE )
Inlet Thread S60x6 2″ Female
Sizes Available 1). S60x6 Female to 1/2″ BSP/NPT Male
2). S60x6 Female to 3/4″ BSP/NPT Male
3). S60x6 Female to 1″ BSP/NPT Male
4). S60x6 Female to 1-1/2″ BSP/NPT Male
5). S60x6 Female to 2″ BSP/NPT Male
6). S100x8 Female to 2″ BSP Male 
 
  S60x6 2″ Female to BSP Female IBC Adaptor 
Material Polypropylene ( PP )
Seal Polyethylene ( PE )
Inlet Thread S60x6 Female Thread
Size Available 1). S60x6 Female to 1″ BSP Female 
2). S60x6 Female to 1-1/2″ BSP Female 
1). S60x6 Female to 2″ BSP Female 
Packing 200PCS/CTN
 
  6″ IBC Venting Cap
Art No. 6″ IBC Venting Cap
Material PP
Size 6″/155MM
Thread 2″
Colors Black or as per buyer’s request
Packing 100PCS/CTN
G/N Weight 27.6/26.5KGS
Carton Size 58 x 58 x 45cm

 

Screw Shaft Features Explained

When choosing the screw shaft for your application, you should consider the features of the screws: threads, lead, pitch, helix angle, and more. You may be wondering what these features mean and how they affect the screw’s performance. This article explains the differences between these factors. The following are the features that affect the performance of screws and their properties. You can use these to make an informed decision and purchase the right screw. You can learn more about these features by reading the following articles.

Threads

The major diameter of a screw thread is the larger of the 2 extreme diameters. The major diameter of a screw is also known as the outside diameter. This dimension can’t be directly measured, but can be determined by measuring the distance between adjacent sides of the thread. In addition, the mean area of a screw thread is known as the pitch. The diameter of the thread and pitch line are directly proportional to the overall size of the screw.
The threads are classified by the diameter and pitch. The major diameter of a screw shaft has the largest number of threads; the smaller diameter is called the minor diameter. The thread angle, also known as the helix angle, is measured perpendicular to the axis of the screw. The major diameter is the largest part of the screw; the minor diameter is the lower end of the screw. The thread angle is the half distance between the major and minor diameters. The minor diameter is the outer surface of the screw, while the top surface corresponds to the major diameter.
The pitch is measured at the crest of a thread. In other words, a 16-pitch thread has a diameter of 1 sixteenth of the screw shaft’s diameter. The actual diameter is 0.03125 inches. Moreover, a large number of manufacturers use this measurement to determine the thread pitch. The pitch diameter is a critical factor in successful mating of male and female threads. So, when determining the pitch diameter, you need to check the thread pitch plate of a screw.
screwshaft

Lead

In screw shaft applications, a solid, corrosion-resistant material is an important requirement. Lead screws are a robust choice, which ensure shaft direction accuracy. This material is widely used in lathes and measuring instruments. They have black oxide coatings and are suited for environments where rusting is not acceptable. These screws are also relatively inexpensive. Here are some advantages of lead screws. They are highly durable, cost-effective, and offer high reliability.
A lead screw system may have multiple starts, or threads that run parallel to each other. The lead is the distance the nut travels along the shaft during a single revolution. The smaller the lead, the tighter the thread. The lead can also be expressed as the pitch, which is the distance between adjacent thread crests or troughs. A lead screw has a smaller pitch than a nut, and the smaller the lead, the greater its linear speed.
When choosing lead screws, the critical speed is the maximum number of revolutions per minute. This is determined by the minor diameter of the shaft and its length. The critical speed should never be exceeded or the lead will become distorted or cracked. The recommended operational speed is around 80 percent of the evaluated critical speed. Moreover, the lead screw must be properly aligned to avoid excessive vibrations. In addition, the screw pitch must be within the design tolerance of the shaft.

Pitch

The pitch of a screw shaft can be viewed as the distance between the crest of a thread and the surface where the threads meet. In mathematics, the pitch is equivalent to the length of 1 wavelength. The pitch of a screw shaft also relates to the diameter of the threads. In the following, the pitch of a screw is explained. It is important to note that the pitch of a screw is not a metric measurement. In the following, we will define the 2 terms and discuss how they relate to 1 another.
A screw’s pitch is not the same in all countries. The United Kingdom, Canada, and the United States have standardized screw threads according to the UN system. Therefore, there is a need to specify the pitch of a screw shaft when a screw is being manufactured. The standardization of pitch and diameter has also reduced the cost of screw manufacturing. Nevertheless, screw threads are still expensive. The United Kingdom, Canada, and the United States have introduced a system for the calculation of screw pitch.
The pitch of a lead screw is the same as that of a lead screw. The diameter is 0.25 inches and the circumference is 0.79 inches. When calculating the mechanical advantage of a screw, divide the diameter by its pitch. The larger the pitch, the more threads the screw has, increasing its critical speed and stiffness. The pitch of a screw shaft is also proportional to the number of starts in the shaft.

Helix angle

The helix angle of a screw shaft is the angle formed between the circumference of the cylinder and its helix. Both of these angles must be equal to 90 degrees. The larger the lead angle, the smaller the helix angle. Some reference materials refer to angle B as the helix angle. However, the actual angle is derived from calculating the screw geometry. Read on for more information. Listed below are some of the differences between helix angles and lead angles.
High helix screws have a long lead. This length reduces the number of effective turns of the screw. Because of this, fine pitch screws are usually used for small movements. A typical example is a 16-mm x 5-inch screw. Another example of a fine pitch screw is a 12x2mm screw. It is used for small moves. This type of screw has a lower lead angle than a high-helix screw.
A screw’s helix angle refers to the relative angle of the flight of the helix to the plane of the screw axis. While screw helix angles are not often altered from the standard square pitch, they can have an effect on processing. Changing the helix angle is more common in two-stage screws, special mixing screws, and metering screws. When a screw is designed for this function, it should be able to handle the materials it is made of.
screwshaft

Size

The diameter of a screw is its diameter, measured from the head to the shaft. Screw diameters are standardized by the American Society of Mechanical Engineers. The diameters of screws range from 3/50 inches to 16 inches, and more recently, fractions of an inch have been added. However, shaft diameters may vary depending on the job, so it is important to know the right size for the job. The size chart below shows the common sizes for screws.
Screws are generally referred to by their gauge, which is the major diameter. Screws with a major diameter less than a quarter of an inch are usually labeled as #0 to #14 and larger screws are labeled as sizes in fractions of an inch. There are also decimal equivalents of each screw size. These measurements will help you choose the correct size for your project. The screws with the smaller diameters were not tested.
In the previous section, we described the different shaft sizes and their specifications. These screw sizes are usually indicated by fractions of an inch, followed by a number of threads per inch. For example, a ten-inch screw has a shaft size of 2” with a thread pitch of 1/4″, and it has a diameter of 2 inches. This screw is welded to a two-inch Sch. 40 pipe. Alternatively, it can be welded to a 9-inch O.A.L. pipe.
screwshaft

Shape

Screws come in a wide variety of sizes and shapes, from the size of a quarter to the diameter of a U.S. quarter. Screws’ main function is to hold objects together and to translate torque into linear force. The shape of a screw shaft, if it is round, is the primary characteristic used to define its use. The following chart shows how the screw shaft differs from a quarter:
The shape of a screw shaft is determined by 2 features: its major diameter, or distance from the outer edge of the thread on 1 side to the inner smooth surface of the shaft. These are generally 2 to 16 millimeters in diameter. Screw shafts can have either a fully threaded shank or a half-threaded shank, with the latter providing better stability. Regardless of whether the screw shaft is round or domed, it is important to understand the different characteristics of a screw before attempting to install it into a project.
The screw shaft’s diameter is also important to its application. The ball circle diameter refers to the distance between the center of 2 opposite balls in contact with the grooves. The root diameter, on the other hand, refers to the distance between the bottommost grooves of the screw shaft. These are the 2 main measurements that define the screw’s overall size. Pitch and nominal diameter are important measurements for a screw’s performance in a particular application.

Lubrication

In most cases, lubrication of a screw shaft is accomplished with grease. Grease is made up of mineral or synthetic oil, thickening agent, and additives. The thickening agent can be a variety of different substances, including lithium, bentonite, aluminum, and barium complexes. A common classification for lubricating grease is NLGI Grade. While this may not be necessary when specifying the type of grease to use for a particular application, it is a useful qualitative measure.
When selecting a lubricant for a screw shaft, the operating temperature and the speed of the shaft determine the type of oil to use. Too much oil can result in heat buildup, while too little can lead to excessive wear and friction. The proper lubrication of a screw shaft directly affects the temperature rise of a ball screw, and the life of the assembly. To ensure the proper lubrication, follow the guidelines below.
Ideally, a low lubrication level is appropriate for medium-sized feed stuff factories. High lubrication level is appropriate for larger feed stuff factories. However, in low-speed applications, the lubrication level should be sufficiently high to ensure that the screws run freely. This is the only way to reduce friction and ensure the longest life possible. Lubrication of screw shafts is an important consideration for any screw.

China Hot selling Plastic Tap 3/4China Hot selling Plastic Tap 3/4

Tags

Recent Posts